Cements

• Dentsply ChemFil Superior is a fast-setting glass-ionomer restorative material consisting of a blend of alumino silicate glass and polyacrylic acid.

1.Dry the area to be restored.

2.Attach a disposable applicator to the syringe.

3.Apply a small amount of dengoglass not exceeding thickness of 1mm

4. Light cure the resin by  over the entire surface for 20-30 sec.

5. Proceed With The Restoration Technique.

• Excellent adhesion to both tooth and metal.
• Biocompatibility and a tooth-like coefficient of thermal expansion reduces the risk of post-operative sensitivity.
• Good mixing properties results in a smooth creamy mix with good flow.
• Film thickness of just 15 microns makes complete seating of crowns easy.
• Extended working time with sharp set.
• Long term fluoride release.

G-CEM is a self-adhesive, resin cement featuring an advanced formulation that offers unparalleled self-adhesive properties that seal and protect the tooth

• Smaller particles
       Excellent aesthetics and polishability
• Higher filler loading
       Significantly improved abrasion resistance
• Good radiopacity
       Facilitating post-operative diagnosis
• Self-adhesive to tooth structure

• The initiator system enables good chemical self-curing.
• Stronger than glass ionomer cement.
• More esthetic than amalgam and glass ionomer cement.
• Time-saving replacement of tooth structure in only four working steps.
• Permanent restorations of Class I and II.
• Restoration of deciduous teeth.

N-Etch is a gel used for enamel etching and dentin conditioning in conjunction with adhesives, composites, luting materials and fissure sealants.

• Excellent adhesion to both tooth and metal.
• Biocompatibility and a tooth-like coefficient of thermal expansion reduces the risk of post-operative sensitivity.
• Good mixing properties results in a smooth creamy mix with good flow.
• Film thickness of just 15 microns makes complete seating of crowns easy.
• Extended working time with sharp set.
• Long term fluoride release.

As a true glass ionomer, it chemically bonds to tooth structure, has a tooth-like coefficient of thermal expansion and releases significant levels of rechargeable fluoride. It is available in hand-mix powder-liquid and premeasured capsules.

• Permanent class III and V restorations
• Permanent class I small restorations
• Primary teeth fillings
• Fissure sealing
• Fillings of cervical erosions
• Fillings prior to crown preparation.

• Shofu Hy-Bond Glasionomer CX are the luting cements contains the patented Hy-Agent additive which consists of tannic acid, zinc fluoride and strontium fluoride.

• Allows minimal cavity preparation.
• Less stress on margins and marginal seal.
• Protects against secondary caries.
• Promotes internal remineralization and surface strengthening.

• Provides a clear, glossy surface for composite resins, glass ionomers, jacket crowns, veneers and provisionals.
• Protects glass ionomer restorations against excessive water contamination during initial cure.
• Increases wear resistance of restorations.
• Restores aesthetic appearance and marginal integrity when used to repair the interface between restorations and marginal tooth structure.

• Light-curing material with controlled time of curing.
• Easy application.
• Possibility of immediate “sandwich” filling.
• Etching and application of an adhesive is not necessary thanks to the strong chemical adhesion
• Stable adhesion to the hard dental tissues.
• Outstanding mechanical properties; compressive strength typically 155 MPa (min. 130 MPa), flexural strength typically 46 MPa (min. 20 MPa)
• Excellent aesthetic results, tooth-like fillings.
• Optimum opacity.
• Outstanding biological compatibility.
• Radiopaque.

• Excellent adhesion to both tooth and metal.
• Biocompatibility and a tooth-like coefficient of thermal expansion reduces the risk of post-operative sensitivity.
• Good mixing properties results in a smooth creamy mix with good flow.
• Film thickness of just 15 microns makes complete seating of crowns easy.
• Extended working time with sharp set.
• Long term fluoride release.

• A truly self-adhesive, bulk filling glass ionomer restorative, GlasIonomer FX ULTRA performs conventional restoratives in its class.