SDI Conseal F Fissure Sealant

DIRECTIONS FOR USE :-

Clean and isolate tooth.
Etch tooth surface with Super Etch LV for at least 30 seconds, no more than 60 seconds.
Wash thoroughly with water.
Completely dry tooth.
Note : a dry field is essential for the following steps.
Directly inject or brush apply Conseal f pit and fissure sealant.
Light cure Conseal f for 20 seconds.

CAUTION : Ensure the dispensing tip hub is firmly attached to the Super Etch and Conseal f syringe by twisting the hub securely onto the syringe